@article { author = {Hajibadali, A and Baghaei nejhad, M and Farzi, GH}, title = {Fabrication of polymer Schottky diode with Al-PANI/MWCNT-Au structure}, journal = {Iranian Journal of Physics Research}, volume = {14}, number = {2}, pages = {154-160}, year = {2019}, publisher = {Isfahan University of Technology, The Physics Society of Iran}, issn = {1682-6957}, eissn = {2345-3664}, doi = {}, abstract = {In this research, Schottky diode with Al-PANI/MWCNT-Au structure was fabricated using spin coating of composite polymer and physical vapor deposition of metals. For this purpose, a thin layer of gold was coated on glass and then composite of polyaniline/multi-walled carbon nanotube was synthesized and spin-coated on gold layer. Finally, a thin layer of aluminum was coated on polymer layer. The current-voltage characteristics of diode were studied and found that I-V curve is nonlinear and nonsymmetrical, showing rectifying behavior. I-V characteristics plotted on a logarithmic scale for Schottky diode showed two distinct power law regions. At lower voltages, the mechanism follows Ohm’s Law and at higher voltages, the mechanism is consistent with space charge limited conduction (SCLC) emission. The parameters extracted from I-V characteristics were also calculated.}, keywords = {Schottky diode,polyaniline,multi-walled carbon nanotube,spin coat}, title_fa = {ساخت دیود شاتکی پلیمری با ساختار Al-PANI/MWCNT-Au}, abstract_fa = {در این پژوهش دیود شاتکی با ساختار Al-PANI/MWCNT-Au به‌روش لایه نشانی چرخشی و بخار فیزیکی ساخته شده است. برای این منظور لایه نازکی از طلا بر روی شیشه آزمایشگاهی به‌روش بخار فیزیکی لایه نشانی شد، سپس پلی‌آنیلین در محیطی که نانو لوله کربنی پخش شده بود، به‌روش پلیمریزاسیون رادیکالی پلیمریزه شده و کامپوزیت پلی آنیلین/ نانو لوله کربنی چند دیواره تهیه گردید. فیلم یکنواختی از کامپوزیت حاصل روی سطح طلا با روش لایه نشانی چرخشی ایجاد شد، سپس لایه نازکی از آلومینیوم به‌روش بخار فیزیکی روی فیلم پلیمری ایجاد گردید. منحنی مشخصه جریان- ولتاژ دیود ساخته شده، رسم و بررسی شد. نتایج نشان می‌دهد که این منحنی غیرخطی و نامتقارن است و افزاره رفتار دیودی و یکسوسازی از خود نشان می‌دهد. تئوری‌های انتقال جریان برای دیود بررسی شد و مشاهده گردید که برای نمونه دیود ساخته شده با کامپوزیت پلی‌آنیلین و نانو لوله کربنی فرآیند غالب انتقال جریان، Space-Charge Limited Conduction (SCLC) می‌باشد.}, keywords_fa = {دیود شاتکی,پلی‌آنیلین,نانولوله ‌کربنی چند دیواره,لایه نشانی چرخشی}, url = {https://ijpr.iut.ac.ir/article_1077.html}, eprint = {https://ijpr.iut.ac.ir/article_1077_a71c5a143df24982ac4ae5aa3595b17c.pdf} }