1394 15 2 59 0
0 بررسی اهمیت و کاربرد شتاب‌دهنده‌ها در دنیای امروز An investigation into the importance and applications of accelerators in today’s world https://ijpr.iut.ac.ir/article_1129.html 10.18869/acadpub.ijpr.15.2.119 0 این مقاله، حاصل پژوهشی گروهی است که هدف آن بررسی اهمیت و کاربرد شتاب‌دهنده‌ها در زندگی امروزی بوده است. در این مقاله علاوه بر بررسی کاربردهای گسترده شتاب‌دهنده‌ها در امور زندگی امروزی، رشد صعودی استفاده از آن‌ها در بخش‌های مختلف نیز به طور کمی گزارش شده است. ارائه آمار شتاب‌دهنده‌ها در کشورهای مختلف در کنار مقایسه‌ وضعیت ایران در این زمینه، لزوم توجه بیشتر به این حوزه را نشان می‌دهد 1 In this paper, the importance and applications of accelerators in today’s world have been investigated. A survey on diverse applications of accelerators in modern world’s issues and their growth in various fields of technology has been conducted. In addition, some statistics of miscellaneous accelerator numbers in different countries and a comparison of them with present situation in Iran’s statistics are presented 119 128 محمد لامعی رشتی M Lamehi Rashti پژوهشگاه علوم و فنون هسته‌ای، سازمان انرژی اتمی ایران، تهران Iran mlamehi@aeoi.org.ir فرشاد قاسمی F Ghasemi پژوهشگاه علوم و فنون هسته‌ای، سازمان انرژی اتمی ایران، تهران Iran سارا زارعی S Zarei پژوهشگاه علوم و فنون هسته‌ای، سازمان انرژی اتمی ایران، تهران Iran حسین سیار H Sayyar پژوهشگاه علوم و فنون هسته‌ای، سازمان انرژی اتمی ایران، تهران Iran حامد آل‌ابراهیم H Aleebrahim پژوهشگاه علوم و فنون هسته‌ای، سازمان انرژی اتمی ایران، تهران Iran مهدی خسروانی M Khosravani پژوهشگاه علوم و فنون هسته‌ای، سازمان انرژی اتمی ایران، تهران Iran میترا انصاری M Ansari پژوهشگاه علوم و فنون هسته‌ای، سازمان انرژی اتمی ایران، تهران Iran مرتضی یاحقی M Yahaghi پژوهشگاه علوم و فنون هسته‌ای، سازمان انرژی اتمی ایران، تهران Iran امیرحسین میردامادی AH Mirdamadi پژوهشگاه علوم و فنون هسته‌ای، سازمان انرژی اتمی ایران، تهران Iran شیماسادات مدنی SH Madani پژوهشگاه علوم و فنون هسته‌ای، سازمان انرژی اتمی ایران، تهران Iran material analysis industrial sterilization isotope production accelerator hadron-therapy 1. W Henning, and C Shank, “Accelerators for America’s Future,” June Sandbox Studio, Chicago, (2010).##2. U Amaldi, “Hadron Therapy in The World,” University of Milano Bicocca and TERA Foundation, Italy (2008) 10.##3. X J Ma, C Lin, and W Zhen, Biomed. Imaging Inter. J. (2008) 6.##4. U Amaldi, “Accelerators for Medical Applications,” EPAC96 (1996).##5. M Silari, “Medical Applications of Particle Accelerators,” Seminar at the John Adams Institute for Accelerator Science (2011).##6. D M Parkin, F Bray, J Ferlay, and P Pisani, CA Cancer Journal for Clinicians (2002) 100.##7. J Huang, “Boron Neutron Capture Therapy for Cancer Treatments,” Department of Physics Faculty of Electronics & Physical Sciences University of Surrey (2009).##8. “Current Status And Prespective of Charged Particle Radiotherapy in Japan,”54th IAEA General Conference, September 21-22 Vienna (2010); http://www-pub.iaea.org/MTCD/Meetings/PDFplus/##2010/cn189/cn189Presentations/Session%204/TSUJI.pdf.##9. “Accelerators for Hadrontherapy and the Role of Industry,” Particle Therapy Siemens AG Healthcare Sector, (2008); http://epaper.kek.jp/e08/talks/weim01_talk.pdf.##10. V L Auslender, A J Berejka, et al., Industrial Radiation Processing With Electron Beams and X-rays, IAEA 1 May (2011) Revision 6.##11. M R Cleland, “Industrial Applications of Electron Accelerators,” CERN (2006) 385.##12. J Dran, “Accelerators in Art and Archaeology,” EPAC (2002).##13. D Kalyani, “A Study to Evaulate the Effectiveness of Information Booklet on Knowledge Regarding Food Poisoning in School Going Children Among Primary School Teachers in Selected Governoment Schools At Bijapur,” Rajiv Gandhi University of Health Sciences (2012).##14. S Kuk, S M Kim, Won-Gu Kang, H Bumsoo, K Nikolai Kuksanov, and K Jeong, Journal of the Korean Physical Society, 59 6 (2011) 3485.##15. U Amaldi, “The Important of Particle Accelerators,” EPAC2000, Vienna, Austria (2000).##16. R W Hamm, “Accelerators and Instrumentation for Industrial Applications,” 9th ICFA Seminar (2008).##17. D C Barrera, “C-band Linac for a Racetrack Microtron,” Madrid University (2010).##18. R W Hamm and M E Hamm, “Introduction to the Beam Business in Industrial Accelerators and Their Applications,” World Scientific (2012)##
0 بهینه‌سازی شتابگر الکترواستاتیک 200 کیلو ولت Optimization of 200 kV electrostatic accelerator https://ijpr.iut.ac.ir/article_1130.html 10.18869/acadpub.ijpr.15.2.129 0 بهینه‏سازی شتابگر الکترواستاتیک 200 کیلو ولت، به منظور افزایش جریان یون بر روی هدف، بهبود کیفیت خلاء، کاهش گسیل پرتو ایکس و افزایش پایداری منبع ولتاژ بالا و بیشینه ولتاژ قابل حصول آن انجام گرفت. به منظور به دست آوردن محدوده مجاز خطاها در ساخت ستون شتابگر الکترواستاتیکی، ابتدا اثر خطاهای مختلف بر  مسیر حرکت ذرات ستون شتابگر به وسیله نرم‏افزار 0/7 Simion (سیمیون 7) شبیه سازی شد. نتیجه‌گیری شد که در تراز کردن و هم محور کردن قطعات ستون شتابگر، خطا برای هر قطعه باید کمتر از 1/0 میلی‏متر باشد. سپس با استفاده از پرداخت کاری سطوح با دقت مناسب به روش حمام فراصوتی و ساخت قیدهای دقیق ستون جدید مونتاژ شد. اندازه‏گیری‏ها نشان دادند که با اعمال این تغییرات کیفیت خلاء بهبود یافت و بیشینه جریان اندازه‏گیری شده بر روی هدف به  میلی آمپر رسید، که در مقایسه با دستگاه قبلی 50 درصد افزایش داشت. در عین حال این بهینه سازی افزایش گسیل پرتوهای ایکس را به میزان 25 درصد به دنبال داشت. بهینه سازی‏های ولتاژ بالا در حال بررسی و آزمایش هستند 1 Optimizations on 200 kV electrostatic accelerator have been done in order to increasing ion current on target, improving vacuum condition and reduction in x-rays emission, increasing stability of high voltage power supply and reaching much greater achievable voltage value. The accelerator tube has most important effect on beam tracing in the electrostatic accelerators. So precautions most be considered in designing and constructing of this part. In order to finding permissible tolerances in construction and assembling of 200 kV electrostatic accelerator column, first the effects of angle deviation of a part from accelerator axis on beam track in the accelerator tube was simulated with Simion 7.0 computer program. We found that in order to prevent beam lost, the tolerances of balancing and co-centering of each part should be smaller than 0.1 mm. Each part of accelerator tube constructed by tolerances lower than 0.05 mm. Ultrasonic cleaning method used in pre-assembling process of parts. Because of its excellences, in the new tube we used borosilicate glass instead of high density alumina as insulators between the metallic electrodes. After three days of working vacuum pumps the system reached to 8.0×10-7 and after months to 5.0×10-7 ultimate pressure values. Measurements showed that by these considerations the maximum of reachable ion current on target was 1.1 mA which increased 50% compared to old machine, while x-ray emission intensity was increased by 25%. Optimizations of high voltage power supply are now under studies and tests 129 136 محمد نظم آبادی M Nazmabadi آزمایشگاه فیزیک نوترون، سازمان انرژی اتمی ایران Iran nazmabadcity@gmail.com حسین قدس H Ghods آزمایشگاه فیزیک نوترون، سازمان انرژی اتمی ایران Iran فرهاد ذنوبی F Zonubi آزمایشگاه فیزیک نوترون، سازمان انرژی اتمی ایران Iran آزاده وکیلی A Vakili آزمایشگاه فیزیک نوترون، سازمان انرژی اتمی ایران Iran حسن زندی H Zandi آزمایشگاه فیزیک نوترون، سازمان انرژی اتمی ایران Iran electrostatic accelerator optimization simion 7.0 simulation 4. R Hellborg; “electrostatic accelerators”; Springer (2005); “Neutron Generators For Analytical Purposes” IAEA, Vienna (2012).##5. David A Dahl, SIMION 3D Version 7.0 User’s Manual, INEL-95/0403 Rev. 5 (2000).##
0 طراحی و ساخت نخستین شتاب‌دهنده پرقدرت صنعتی الکترون ساخت ایران Design and construction of the first Iranian powerful industrial electron accelerator https://ijpr.iut.ac.ir/article_1131.html 10.18869/acadpub.ijpr.15.2.137 0 در این مقاله به معرفی مراحل انجام پروژه طراحی و ساخت شتاب‌دهنده الکترون با انرژی MeVو توان kW به عنوان اولین شتاب‌دهنده پرقدرت صنعتی الکترون ساخت ایران خواهیم پرداخت. این شتاب‌دهنده بر اساس الگوبرداری یکی از قوی‌ترین شتاب‌دهنده‌های صنعتی جهان بنام شتاب‌دهنده رودترون طراحی و ساخته شده است. لیکن طراحی این شتاب‌دهنده به گونه‌ای است که با اتکا به صنایع داخلی و قطعات قابل دسترس در داخل کشور نسبت به بومی سازی آن اقدام شده است. و لذا هرچند که این شتاب‌دهنده دارای همان ساختار شتاب‌دهنده رودترون است ولی در طراحی و ساخت اجزای آن به ویژه مدارهای الکترونیکی تا حدودی متفاوت بوده و نتایج حاصل از تست و راه‌اندازی آن بسیار رضایت بخش است 1 In This paper we will introduce the process of design and manufacturing an electron accelerator with 10MeV energy and 100kW power as the first Iranian powerful industrial electron accelerator. This accelerator designed based on modeling of one of the most powerful industrial accelerator called Rhodotron. But the design of the accelerator in a way that can be localize by relying on domestic industries. So although it looks like a Rhodotron accelerator structure but has some different in design and manufacture of components, the results are satisfactory 137 144 علی محمد پورصالح AM Poursaleh مجتمع پژوهشی یزد، پژوهشگاه علوم و فنون هسته‌ای، سازمان انرژی اتمی ایران Iran am.poursaleh@gmail.com حسین خلفی H Khalafi مجتمع پژوهشی یزد، پژوهشگاه علوم و فنون هسته‌ای، سازمان انرژی اتمی ایران Iran سعید حاصل طلب S Haseltalab مجتمع پژوهشی یزد، پژوهشگاه علوم و فنون هسته‌ای، سازمان انرژی اتمی ایران Iran مجتبی مرتضوی M Mortazavi مجتمع پژوهشی یزد، پژوهشگاه علوم و فنون هسته‌ای، سازمان انرژی اتمی ایران Iran سیدخلیل موسوی S KH Mosavi مجتمع پژوهشی یزد، پژوهشگاه علوم و فنون هسته‌ای، سازمان انرژی اتمی ایران Iran فرشاد قاسمی F Ghasemi مجتمع پژوهشی یزد، پژوهشگاه علوم و فنون هسته‌ای، سازمان انرژی اتمی ایران Iran کاظم جوکار K Joker مجتمع پژوهشی یزد، پژوهشگاه علوم و فنون هسته‌ای، سازمان انرژی اتمی ایران Iran ابوالفضل جمهوری A Jomhori مجتمع پژوهشی یزد، پژوهشگاه علوم و فنون هسته‌ای، سازمان انرژی اتمی ایران Iran industrial electron accelerator electron beam rhodotron accelerator RF system electron gun 1. J Pottier Nucl. Instr. Meth. Phys. Res., 40 (1989) 943.##2. Y Jongen, M Abs, J M Capdevil, D Defrise, F Genin, and A Nguyen, Nucl. Instr. Meth. Phys. Res. 89 (1994) 60.##3. Y jangen, M Abs, T Delvigne, F Genin, and A Ngvyen. Emerging Applications of Radiation Processing 386 (2004) 44##
0 طراحی، شبیه‌سازی و ساخت آهن‌ربای چهارقطبی جهت همگرایی باریکه الکترونی درشتاب‌دهنده پرقدرت صنعتی الکترون Design, simulation and construction of quadrupole magnets for focusing electron beam in powerful industrial electron accelerator https://ijpr.iut.ac.ir/article_1132.html 10.18869/acadpub.ijpr.15.2.145 0 در این مقاله با استفاده از نرم افزار CST Studio CST Studio به طراحی و شبیه‌سازی یک آهنربای چهارقطبی و اپتیک باریکه الکترونی در آن پرداخته شده است و بر اساس آن نسبت به ساخت یک چهار قطبی مغناطیسی جهت استفاده در خط انتقال اولین شتاب‌دهنده پرقدرت صنعتی الکترون ساخت ایران اقدام شده است. برای ایجاد میدان مغناطیسی مناسب، جنس، هندسه هسته‌ها و همچنین تغییرات جریان سیم‌پیچ‌ها بر اندازه و خطوط میدان مغناطیسی مورد بررسی قرار گرفته است. برای آزمون آهنربای چهارقطبی در انرژی باریکه الکترونی 10 مگاالکترون ولت، گسیلندگی باریکه ورودی به چهارقطبی π mm mrad در نظر گرفته شده است. مشاهده شد باریکه به هنگام عبور از چهارقطبی مغناطیسی در یک جهت همگرا و در جهت عمود بر آن واگرا می‌شود. فاصله بهینه بین دو چهارقطبی مغناطیسی برای باریکه دارای گسیلندگی کم به دست آمد. نتایج حاصل از شبیه‌سازی سازگاری خوبی با آزمون‌های عملی دارد 1 In this paper the design and simulation of quadrupole magnets and electron beam optical of that by CST Studio code has been studied. Based on simulation result the magnetic quadrupole has been done for using in beam line of first Iranian powerful electron accelerator. For making the suitable magnetic field the effects of material and core geometry and coils current variation on quadrupole magnetic field have been studied. For test of quadrupole magnet the 10 MeV beam energy and 0.5 pi mm mrad emittance of input beam has been considered. We see the electron beam through the quadrupole magnet focus in one side and defocus in other side. The optimum of distance between two quadrupole magnets for low emittance have been achieved. The simulation results have good agreement with experimental results 145 151 سید خلیل موسوی S KH Mousavi . مجتمع پژوهشی کاربرد پرتوها یزد، شرکت ساخت و توسعه شتاب‌دهنده‌ها و کاربرد آن‌ها (تکنوسان) Iran علی محمد پورصالح A M Poursaleh . مجتمع پژوهشی کاربرد پرتوها یزد، شرکت ساخت و توسعه شتاب‌دهنده‌ها و کاربرد آن‌ها (تکنوسان) Iran am.poursaleh@gmail.com سعید حاصل طلب S Haseltalab . مجتمع پژوهشی کاربرد پرتوها یزد، شرکت ساخت و توسعه شتاب‌دهنده‌ها و کاربرد آن‌ها (تکنوسان) Iran مجتبی مرتضوی M Mortazavi . مجتمع پژوهشی کاربرد پرتوها یزد، شرکت ساخت و توسعه شتاب‌دهنده‌ها و کاربرد آن‌ها (تکنوسان) Iran عباس بهجت A Behjat گروه اتمی و مولکولی، دانشکده فیزیک، دانشگاه یزد، یزد Iran abehjat@yazd.ac.ir محمد عاطفی M Atefi . مجتمع پژوهشی کاربرد پرتوها یزد، شرکت ساخت و توسعه شتاب‌دهنده‌ها و کاربرد آن‌ها (تکنوسان) Iran electron beam magnetic field beam emittance quadrupole CST studio 1. M M Abdelrahman and S G Zakhary, Brazilian J. Physics, 39 (2009) 275.##2. J Orlof, CRC, “Simulation Studies for ton Beam Extraction Systems”, New York (2009).##3. J J Barroso and M O Terra , Brazilian J. physics, 34 (2004).##4. Thomas P wangler, “Principles of RF Linear Accelerator”, john Wiley (1937).##5. Stanley Humphries, J “Charged Particle Beams”, John Wiley and Sons, New York (2013).##6. Stanley Humphries, J “Principles of Charged Particle Acceleration”, John Wiley & sons, New York (2012).##7. S G Anderson, J B Rosenzwieig, “Emittance Measurements of the Space Charge Dominated Thomoson Source Photoinjector”, Particle Accelerator Conference (2001) 2260.##8. S G Anderson and J B Rosenzwieig, Particle Accelerator Conference (2001)##
0 طراحی و ساخت مدولاتور لامپ تترود جهت شتاب‌دهنده پرقدرت الکترون Design and construction of tetrode tube modulator for high power electron accelerator https://ijpr.iut.ac.ir/article_1133.html 10.18869/acadpub.ijpr.15.2.153 0  RFموج پیوسته پرداخته می‌‌شود. این مدولاتور به منظور راه اندازی بخشی از سیستم 200kWبا توان TH781 در این مقاله به تشریح مراحل طراحی و ساخت مدولاتور یکTH781 پروژه ساخت اولین شتاب‌دهنده پرقدرت الکترون ایران مشابه شتاب‌دهنده رودترون مورد استفاده قرار گرفته است. با توجه به حساسیت لامپ تتروددقت در طراحی ساخت قسمت‌های مختلف مدولاتور آن و همچنین ترتیب راه اندازی بسیار با اهمیت بود. لذا علاوه بر طراحی منابع تغذیه، مدارهای کنترلی نیز جهت حفاظت اجزای مختلف لامپ لحاظ شده است. نتایج حاصل از آزمون و بهره برداری این سامانه که برای اولین بار در کشور طراحی و ساخته شده است بسیار رضایت بخش می‌باشد 1 In this paper, a high power tetrode tube (TH781-200kW, cw) modulator is designed and implemented. This modulator is used for a part of RF system of the first Iranian high power electron accelerator project with similar structure to Rhodotron accelerator. Regarding to the level of sensitive and importance of TH781 tube the modulator system designed with high accuracy. So beside of power supplies design the control circuits for protection of the tube have been considered. The results of test and operation of this system that have been constructed in Iran for fist time is very satisfactory 153 158 علی محمد پورصالح A M Poursaleh مجتمع پژوهشی کاربرد پرتوهای یزد، پژوهشگاه علوم و فنون هسته‌ای Iran am.poursaleh@gmail.com شهریار کابلی SH Kaboli دانشکده مهندسی برق، دانشگاه صنعتی شریف، تهران Iran سعید حاصل طلب S Hasel Talab مجتمع پژوهشی کاربرد پرتوهای یزد، پژوهشگاه علوم و فنون هسته‌ای Iran مجتبی مرتضوی M Mortazavi مجتمع پژوهشی کاربرد پرتوهای یزد، پژوهشگاه علوم و فنون هسته‌ای Iran سید خلیل موسوی S KH Mousavi مجتمع پژوهشی کاربرد پرتوهای یزد، پژوهشگاه علوم و فنون هسته‌ای Iran modulator tetrode tube electron accelerator RF amplifier 1. D M Pozar, “Microwave Engineering” Wiley & Sons Publication, (2007).##2. R Colling “Foundations for Microwave Engineering” Wiley & Sons Publication (1992).##3. S Y Liao “Microwave Devices and Circuits” Prentice Hall Publication (2002).##4. Y Jongen, M Abs, J M Capdevila, D Defrise, F Genin, and A Nguyen, Nuclear Instruments and Methods in Physics Research 89 (1994) 60.##5. Y Jongen, M Abs, F Genin, A N Guyen, J M Capdevila, and D Defrise, “The Rhodotron, a 10 MeV 100 kW Beam Power Metric Waves, CW Electron Accelerator”, Proceedings of Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms (1992).##6. Y Jongen, M Abs, F Genin, and A N Guyen, J M Capdevila, and D Defrise, Nuclear Instruments and Methods in Physics Research B 79 (1993) 865.##7. www.thalesgroup.com,tetrodes for particle accelerator (TH781 datasheet)##
0 چشمه نور ایران، اولین آزمایشگاه ملی برای تحقیقات بین رشته‌ای Iranian Light Source Facility, A third generation light source laboratory https://ijpr.iut.ac.ir/article_1134.html 10.18869/acadpub.ijpr.15.2.159 0 طرح چشمه نور ایران (شتابگر ملی ایران)، بزرگترین تسهیلات آزمایشگاهی در مقیاس بزرگ برای پژوهش‌های بین ‌رشته‌ای در کشور است که با هدف تولید تابش سنکروترونی با درخشندگی بسیار زیاد به منظور انجام آزمایش‌های گوناگون در زمینه‌های فیزیک، شیمی، پزشکی، علم مواد، محیط زیست، نانوفناوری، داروسازی و ... به تصویب رسیده است. بر اساس طراحی‌های انجام شده، چشمه نور ایران شامل یک حلقه انبارش الکترونی با محیط 528 متر است که الکترون‌ها با انرژی 3 گیگا الکترون ولت، جریان 400 میلی آمپر و گسیلندگی 477/0 نانومتررادیان در آن انبار می‌شود. نور تولید شده در خطوط باریکه در طیف وسیعی از انرژی از مادون قرمز تا اشعه ایکس سخت با درخشندگی بسیار زیاد، قطبیدگی دلخواه، انرژی قابل تنظیم ابزار مناسبی برای آزمایش‌های مختلف در زمینه‌های گوناگون علمی است که می‌تواند اطلاعات بسیار دقیقی از جزئیات ساختار ماده را در مقیاس اتمی و مولکولی به دست دهد. طراحی و ساخت بخشی از قطعات شتابگر نظیر تقویت کننده بسامد رادیویی حالت جامد، تفنگ الکترونی گرمایونی، مغناطیس‌های دوقطبی و چهارقطبی، دستگاه‌های اندازه‌گیری میدان مغناطیسی و منابع تغذیه با پایداری بسیار زیاد در آزمایشگاه تحقیق و توسعه طرح شتابگر ملی ایران انجام شده است. این مقاله مشخصات و ویژگی‌های طرح چشمه نور ایران را به همراه دستاوردهای تحقیق و توسعه آن در قالب متن، جداول و شکل‌های مربوطه ارائه می‌نماید 1 The Iranian Light Source Facility (ILSF) project is the first large scale accelerator facility which is currently under planning in Iran. On the basis of the present design, circumference of the 3 GeV storage ring is 528 m. Beam current and natural beam emittance are 400 mA and 0.477 nm.rad, respectively. Some prototype accelerator components such as high power solid state radio frequency amplifiers, low level RF system, thermionic RF gun, H-type dipole and quadruple magnets, magnetic measurement laboratory and highly stable magnet power supplies have been constructed at ILSF R&D laboratory 159 173 جواد رحیقی J Rahighi طرح چشمه نور ایران، پژوهشگاه دانش‌های بنیادی، تهران Iran javad.rahighi@ipm.ir محمد لامعی رشتی M Lamehi Rachti طرح چشمه نور ایران، پژوهشگاه دانش‌های بنیادی، تهران Iran رحمان اقبالی R Eghbali طرح چشمه نور ایران، پژوهشگاه دانش‌های بنیادی، تهران.دانشگاه بین المللی امام خمینی، قزوین Iran احسان سلیمی E Salimi طرح چشمه نور ایران، پژوهشگاه دانش‌های بنیادی، تهران Iran حسین قاسم H Ghasem طرح چشمه نور ایران، پژوهشگاه دانش‌های بنیادی، تهران.پژوهشکده ذرات و شتاب‌دهنده‌ها، پژوهشگاه دانش‌های بنیادی تهران Iran خورشید سرحدی KH Sarhadi طرح چشمه نور ایران، پژوهشگاه دانش‌های بنیادی، تهران Iran مرتضی جعفرزاده خطیبانی M Jafarzadeh Khatibani طرح چشمه نور ایران، پژوهشگاه دانش‌های بنیادی، تهران Iran جعفر دهقانی J Dehghani طرح چشمه نور ایران، پژوهشگاه دانش‌های بنیادی، تهران Iran فرهاد سعیدی F Saeidi طرح چشمه نور ایران، پژوهشگاه دانش‌های بنیادی، تهران Iran آرش صادقی پناه A Sadeghipanah طرح چشمه نور ایران، پژوهشگاه دانش‌های بنیادی، تهران Iran storage ring Iranian Light Source Facility brilliance magnet power supply radiofrequency system 1. J Rahighi et al., “Third generation light source project in Iran”, in Proceedings of International Particle Accelerator Conference, San Sebastian, Spain, September 4–9 (2011) 2954.##2. H Ghasem, F Saeidi, and E Ahmadi, “Low Field Low Emittance Lattice for the Storage Ring of Iranian Light Source Facility”, IOP Publishinng for SISSA Medialab (2013).##3. J Rahighi et al., “ILSF, A Third Generation Light Source Laboratory in Iran”, in Proceedings of IPAC2013, Shanghai, China, TUOAB202 (2013).##4. Iranian Light Source Facility Conceptual Design Report, Oct. (2012) 210.##5. J Dehghani and F Saeidi, “ILSF-B-MC-001-IRP-01-01F”, Internal Reports (2014).##6. M Jafarzadeh, E Yousefi, and D Shirangi. “PS-TN-Report Power Suplly”, 20140415-01, Internal ILSF Report (2014).##7. M Jafarzadeh, E Yousefi, D Shirangi, M Akbari, and J Rahighi. “New Purposed High Precision Power Supply For Quadrupole Magnets Of ILSF Using Low Resolution Digital PWM”, in Proceedings of IPAC2013, Shanghai, China (2013).##8. R Heine, et al., “Characterisation of the eu-hom-Damped Normal Conducting 500mhZ Cavity from the Beam Power Spectrum at delta”, EPAC (2006).##9. J Watanabe et al., “Design and Cold Model Test of 500 MHz Damped Cavity Forasp Storage Ring rf System” IPAC (2005).##10. A Fabris et al., “Field Measurement of the Elettra Cavity High Order Modes” IPAC (2002).##11. Darweesh Foudeh, “Sesame Storage Ring rf System”, 17th. ESLS RF Workshop (2013).##12. J Jacob “New Developments on RF Power Sources” RF-2, EPAC’06 - Edinburgh, June (2006).##13. Tsung-Chi Yu, et al., “The Development of High Power Solid-state Mplifier in Nsrrc”, RF-3, IPAC, Japan (2010).##14. M Gaspar, “Solid State Amplifier Development at PSI” RF-4 RF Tech 2nd Workshop (2010).##15. R E Shafer, “Beam Position Monitoring” , Presented at the First Accelerator Instrumentation Workshop, Upton, NY, Oct. 23–26, AIP Conference Proceedings 212 (1989).##16. Juho Hong, Sojeong Lee, and In Soo Koo, Journal of the Korean Physical Society, 59, 2 (2011).##17. H Khosroabadi, M Tabrizchi, and S Kharrazi, Third Users\' Meeting & First Workshop on Beamlines of Iranian Light Source Facility (ILSF), ILSF internal Report, Nov. 21-24 (2010).##18. H Khosroabadi, A Gholampour Azhir, S Amiri, and H Ghasem, “X- Ray Powder Diffraction Beamline for Iranian Light Source Facility”, in Proceedings of IPAC2013, Shanghai, China (2013).##
0 طراحی شبکه برای حلقه انبارش چشمه نور ایران Lattice design for the storage ring of Iranian Light Source Facility https://ijpr.iut.ac.ir/article_1135.html 10.18869/acadpub.ijpr.15.2.175 0 طرح چشمه نور ایران به عنوان یک طرح کلان ملی، با هدف برپایی آزمایشگاه تولید تابش سنکروترونی و به منظور تولید اشعه ایکس با درخشندگی مطلوب برای کاربران است. حلقه انبارش چشمه نور ایران با این هدف در حال طراحی می‌‌‌باشد که بتواند باریکه الکترونی پایدار با انرژی 3 گیگا الکترون ولت، جریان 400 میلی آمپر و گسیلندگی کمتر از 5 نانومتر رادیان را در خود انبار کند به‌طوری‌که در هنگام راه اندازی با سایر چشمه‌های نور سنکروترونی در دنیا قابل رقابت باشد. بدین منظور طراحی‌های مختلفی با خصوصیات متفاوت صورت گرفت که در این مقاله دینامیک خطی و غیر خطی باریکه الکترونی در گزینه اصلی شبکه حلقه انبارش چشمه نور ایران ارائه شده و سایر خصوصیات آن به تفصیل مطالعه شده است. 1 The Iranian Light Source Facility (ILSF) as a national project is a 3 GeV third generation synchrotron light source facility which provides high energy super bright X-ray for the users. Design of the ILSF storage ring emphasizes an ultra low electron beam emittance (below than 5 nm.rad), beam current of 400 mA, great brightness, stability and reliability which make it competitive in the operation years. Several lattice alternatives have been explored for the ILSF storage ring. In this paper, we present the design feature of the ILSF storage ring, give the linear and nonlinear dynamic properties of the lattice and discuss the related beam dynamics specifications 175 182 حسین قاسم H Ghasem پژوهشگاه دانش‌های بنیادی، پژوهشکده ذرات و شتابگرها، تهران.پژوهشگاه دانش‌های بنیادی، طرح چشمه نور ایران، تهران Iran ghasem@ipm.ir اسماعیل احمدی E Ahmadi پژوهشگاه دانش‌های بنیادی، طرح چشمه نور ایران، تهران.دانشکده فیزیک، دانشگاه علم و صنعت ایران، تهران Iran فرهاد سعیدی F Saeidi پژوهشگاه دانش‌های بنیادی، طرح چشمه نور ایران، تهران.گروه فیزیک، دانشکده علوم، دانشگاه اراک، اراک Iran storage ring lattice beam emittance brilliance 1. SESAME Conceptual Design Report Yellow Book, (2003); http://www.sesame.org.jo/sesame/.##2. Candle design report, (2003); http://www.candle.am/.##3. Conceptual Design Report of ILSF, (2012); http://ilsf.ipm.ac.ir/.##4. H Ghasem, F Saeidi, and E Ahmadi, “Low field low emittance lattice for the storage ring of Iranian Light Source Facility”, JINST, 8 (2013) P02023.##5. H Ghasem, D Einfeld, F Saeidi, and E Ahmadi, “Lattice candidates for the ILSF storage ring”, in proceedings of International Particle Accelerator Conference, San Sebastian, Spain September 4−9, (2011) 2957.##6. H Ghasem, F Saeidi, and E Ahmadi, “High field or low field lattice for the storage ring of Iranian Light Source Facility?”, ILSF Beam Dynamic Group Internal Report, ILSF-A-SR- SR-2013-01-02 (2013).##7. A Streun, OPA Lattice Design Code, https://abos.web.psi.ch/opa.##8. M Borland, “Elegant: a flexible sdds-compliant code for accelerator simulation”, Advanced Photon Source Report No. LS-287, Argonne National Laboratory, U.S.A. (2000)##
0 طراحی و ساخت پیش تزریق‌گر الکترون چشمه نور ایران Design and construction of a pre-injector for the Iranian Light Source Facility https://ijpr.iut.ac.ir/article_1136.html 10.18869/acadpub.ijpr.15.2.183 0 S هر شتابگر سنکروترون نیاز به یک پیش تزریق‌گر الکترون برای تزریق اولیه ذرات به حلقه بوستر دارد. پیش تزریق‌گر الکترون چشمه نور ایران یک شتابگر خطی باند به همراه یک تفنگ الکترونی بسامد رادیویی با کاتد گرمایونی است. در این مقاله طراحی شبکه این پیش تزریق‌گر و محاسبات دینامیک باریکه آن به همراه طراحی تفنگ الکترونی بسامد رادیویی، مغناطیس آلفا، مغناطیس‌های چهار قطبی و ساختار‌های شتابگر خطی شرح داده شده‌اند. نتایج اندازه‌گیری بر روی قطعات تفنگ الکترونی بسامد رادیویی ساخته شده در کشور، خطای ابعاد کمتر از را نشان می‌دهد که اندازه‌گیری‌های کم توان بسامد رادیویی نیز این نتایج را تایید می کنند μm 8/0 و صافی سطح با خطای کمتر ازμm 20    1 Every synchrotron accelerator requires a pre-injector for primary injection of the electrons into the booster ring. The Iranian Light Source Facility (ILSF) pre-injector is a 150 MeV S-band linear accelerator with a thermionic cathode RF gun. The design of the pre-injector lattice and its beam dynamics calculation results together with the design of RF gun, alpha magnet, quadrupole magnets and linear accelerator structures are described in this article. The measurement results of the RF gun prototype fabricated in Iran demonstrate a dimension error less than 20 μm and a surface roughness of less than 0.8 μm 183 188 آرش صادقی‌پناه A Sadeghipanah پژوهشگاه دانش‌های بنیادی، طرح چشمه نور ایران Iran arash.sadeghipanah@gmail.com خورشید سرحدی KH Sarhadi پژوهشگاه دانش‌های بنیادی، طرح چشمه نور ایران Iran جواد رحیقی J Rahighi پژوهشگاه دانش‌های بنیادی، طرح چشمه نور ایران Iran javad.rahighi@ipm.ir pre-injector RF electron gun beam dynamics alpha magnet 1. H Ghasem et al., Journal of Instrumentation, 8 )2013(.##2. J H Billen and L M Young, \"Poisson\'s Superfish Manual\", Los Alamos National Laboratory, USA )2006(.##3. \"CST Microwave Studio Tutorial\", CST GmbH )2006(.##4. Michael Borland, “Summary of Equations and Methods Used in SPIFFE”, APS/IN/LINAC/92-2, USA, June )1992(.##5. L C Maier and J C Slater, Journal of Applied Physics, 23 )1952(.##6. \"RADIA Documentation\", ESRF )2006(.##7. Michael Borland, “ELEGANT: A Flexible SDDS-Compliant Code for Acceleration Simulation”, Advanced Photon Source LS-287, USA, September )2000(.##
0 طراحی و ساخت اولین نمونه چهارقطبی الکترومغناطیسی حلقه انبارش طرح چشمه نور ایران Design and fabrication of the first quadrupole magnet for the ILSF storage ring https://ijpr.iut.ac.ir/article_1137.html 10.18869/acadpub.ijpr.15.2.189 0 چشمه نور ایران مجموعه‌ای از شتابگر خطی، حلقه افزاینده و یک حلقه انبارش الکترون با انرژی 3 گیگا الکترون ولت و جریان الکتریکی 400 میلی آمپر است. علاوه بر ایجاد اولین آزمایشگاه مقیاس بزرگ برای تحقیقات و مطالعات بین رشته‌ای در ایران، طرح چشمه نور ایران امکان دستیابی به تکنولوژی طراحی و ساخت قطعات و تجهیزات شتابگر را فراهم می‌آورد. حلقه انبارش چشمه نور ایران دارای 100 الکترومغناطیس‌ دوقطبی، 320 چهار قطبی و 320 شش قطبی بوده که هر یک به منظوری خاص در حلقه انبارش چیده می‌شوند. در این مقاله مراحل طراحی و ساخت یک نمونه از الکترومغناطیس‌های چهارقطبی به عنوان اولین نمونه ساخته شده در ایران به تفصیل آورده شده است. مونتاژ الکترومغناطیس‌ چهارقطبی به اتمام رسیده و اندازه‌گیری‌های مغناطیسی آن در حال انجام است. طرح چشمه نور ایران در حال طراحی و ساخت تمامی الکترومغناطیس‌های مورد نیاز طرح است 1 The Iranian Light Source Facility (ILSF) is a new 3 GeV third generation synchrotron light source which is consisted of several pre-accelerators and a storage ring with the beam current of 400 mA. Based on the main lattice candidate, the storage ring includes of 100 dipoles, 320 quadrupoles and 320 sextupole magnets. To develop fabrication procedures and techniques and to compare the measurement results with the design data, a series of lattice magnets have been fabricated inside Iran with internal industries. In this article the first prototype quadrupole magnet fabrication process has been described 189 196 فرهاد سعیدی F Saeidi طرح چشمه نور ایران، پژوهشگاه دانش‌های بنیادی، خیابان ارتش، تهران.گروه فیزیک، دانشکده علوم، دانشگاه اراک، اراک Iran farhad.saeidi@ipm.ir جعفر دهقانی J Dehghani طرح چشمه نور ایران، پژوهشگاه دانش‌های بنیادی، خیابان ارتش، تهران Iran وحید مرادی V Moradi طرح چشمه نور ایران، پژوهشگاه دانش‌های بنیادی، خیابان ارتش، تهران Iran ابوالفضل شهوه A Shahveh طرح چشمه نور ایران، پژوهشگاه دانش‌های بنیادی، خیابان ارتش، تهران Iran محمد رزازیان M Razazian طرح چشمه نور ایران، پژوهشگاه دانش‌های بنیادی، خیابان ارتش، تهران Iran سمیرا فاتحی S Fatehi طرح چشمه نور ایران، پژوهشگاه دانش‌های بنیادی، خیابان ارتش، تهران Iran حسین قاسم H Ghasem طرح چشمه نور ایران، پژوهشگاه دانش‌های بنیادی، خیابان ارتش، تهران.پژوهشکده ذرات و شتابگرها، پژوهشگاه دانش‌های بنیادی، خیابان ارتش، تهران Iran جواد رحیقی J Rahighi طرح چشمه نور ایران، پژوهشگاه دانش‌های بنیادی، خیابان ارتش، تهران Iran javad.rahighi@ipm.ir رضا پور ایمانی R Pourimani گروه فیزیک، دانشکده علوم، دانشگاه اراک، اراک Iran quadrupole magnet magnetic field quality yoke coil 1. Poisson/Superfish Group of Codes, Los Alamos National Laboratory, LA-UR-87-126 (1987).##2. Finite Element Method Magnetics code (FEMM), www.FEMM.info.##3. RADIA magnet design code, http://ftp.esrf.eu/##pub/InsertionDevices/.##4. J Tanabe,“Iron Dominated Electromagnets Design, Fabrication, Assembly and Measurements”, World Scientific, Singapore (2005).##5. F Saeidi, et al., “Iranian Light Source Facility Storage Ring Low Field Magnets”, in Proceedings of the International Particle Accelerator Conference, Dresden, Germany, June15-20, (2014) 1241; http://ilsf.ipm.ac.ir/.##6. H Ghasem, F Saeidi, and I Ahmadi, JINST 8 (2013) P02023##
0 خطوط باریکه چشمه نور ایران Beamlines for Iranian Light Source Facility https://ijpr.iut.ac.ir/article_1138.html 10.18869/acadpub.ijpr.15.2.197 0 در این مقاله خطوط باریکه روز اول راه ‌اندازی چشمه نور ایران و مشخصات آن‌ها معرفی می‌شوند. از میان این خطوط باریکه، طراحی مفهومی دو خط باریکه طیف سنجی میکروسکوپیکی، و پراش پودری، به عنوان پرکاربردترین خطوط باریکه، انجام شده است. در این مقاله به بررسی مشخصه­های پرتو چشمه نور، طراحی اپتیکی، مشخصات - شار فوتونی در مکان نمونه 6-30keVقطعات‌ و ردیابی پرتو فوتون در این خطوط باریکه پرداخته شده است. خط باریکه پراش پودری محدوده انرژی کارکردی را دارد. محدوده انرژی خط باریکه طیف ­سنجی میکروسکوپیکی  E/E=10-4Δ وقدرت تفکیک‌انرژی 0/1×0/1-10×1mm2 سطح مقطع پرتو فوتونی در مکان نمونه  برابر با96eVاست که از یک مغناطیس نوسان‌ساز خطی گسیل می‌شود. بیشینه شار فوتون گسیل شده در انرژی هارمونیک اصلی eV90-2500  پرتو فوتونی با بیشینه توان تفکیک‌پذیری18201000 eVاستهمچنین، در انرژی در مکان نمونه ایجاد می‌شودH×V= 4×2- 27×74μm و سطح مقطع در محدود 1 This paper describes day-one beamlines of the Iranian Light Source Facility and design concept of powder diffraction and spectromicroscopy beamlines as the most priorities of each synchrotron that cover the research requirements in the fields of physics, chemistry, nano-science, etc. For powder diffraction beamline energy range is 6-30 keV, resolution: 10-4, flux: 1012(ph/s/0.1%B.W.) and spot size at sample is 0.1×0.1-1×10 mm2. For spectromicroscopy beamline energy range is 90-2500 eV, flux: 3×1015(ph/s/0.1%B.W.@96eV), resolving power of 1820 at 1000 eV and spot size at sample is 4×2-27×74 µm2 197 204 اعظم غلام پورآژیر A Gholampour Azhir تهران، بزرگراه ارتش، پژوهشگاه دانش‌های بنیادی، طرح چشمه نور ایران Iran azam.gholampowr@ipm.ir سمیه امیری S Amiri تهران، بزرگراه ارتش، پژوهشگاه دانش‌های بنیادی، طرح چشمه نور ایران Iran حسین خسروآبادی H Khosroabadi تهران، بزرگراه ارتش، پژوهشگاه دانش‌های بنیادی، طرح چشمه نور ایران Iran جواد رحیقی J Rahighi تهران، بزرگراه ارتش، پژوهشگاه دانش‌های بنیادی، طرح چشمه نور ایران Iran javad.rahighi@ipm.ir محمد لامعی رشتی M Lamehi Rachti تهران، بزرگراه ارتش، پژوهشگاه دانش‌های بنیادی، طرح چشمه نور ایران Iran beamline Powder diffraction spectromicroscopy X-ray optics 1. ILSF CDR: http://ilsf.ipm.ac.ir/Publications/ILSF- CDR.pdf.##2. D M Paganin "Coherent X-ray Optics", Oxford University Press. (2006)136.##3. Helmut Wiedeman;"Synchrotron Radiation", Springer Press.(2002) 31.##4. T Tanaka and H Kitamura, J. Synchrotron Radiation 8 (2001) 1221.##5. H Ghasem, F Saeidiand, and E Ahmadi, JINT, 8 (2013) 1.##6. B D Patterson et al., Nuclear Instruments and Methods in Physics Research A, 540(2005)42.##7. http://www.nanotech.wisc.edu/shadow/.##8. H Khosroabadi, S Amiri, and A Gholampour, "X-ray powder Diffraction Beamline for Iranian Light Source Facility", internal report, June (2013).##9. H Khosroabadi, A Gholampour Azhir, S Amiri, and H Ghasem, "X-ray Powder Diffraction Beamline for Iranian Light Siurce Facility", Proceedings of IPAC, Shanghai, China (2013).##10. Manuel Sánchez del Ríoand Olivier Mathon; "A Simple Formula to Calculate the X-ray Flux After a Double-Crystal Monochromator"; Proc. SPIE, 5536 (2004) 157.##11. W B Peatman, “Gratings, Mirrors and Slits”, Gordon and Breach Science Publishers (1997).##12. H A Padmore, Rev. Sci. Instrum., 60 (1989) 1608; doi: 10.1063/1.1141043##
0 معرفی پروژه طراحی و ساخت شتاب‌دهنده خطی الکترون پژوهشگاه دانش‌های بنیادی Introduction of design and construction electron linear accelerator project in Institute for Research in Fundamental Sciences(IPM) https://ijpr.iut.ac.ir/article_1139.html 10.18869/acadpub.ijpr.15.2.205 0 شتاب‌دهنده خطی الکترون از پرکاربردترین شتاب‌دهنده­هاست. پروژه­ایی با هدف­ طراحی و ساخت این شتاب‌دهنده پرکاربرد در پژوهشگاه دانش‌های بنیادی (IPM) در حال انجام است. این پروژه به گونه­ای تعریف شده است که تا حد ممکن قسمت­های مختلف این شتاب‌دهنده در ایران ساخته شود. در این مقاله پس از توضیح مختصر اجزای یک شتاب‌دهنده خطی الکترون؛ شامل تفنگ الکترون، تیوب اصلی شتاب‌دهنده، منبع توان رادیوفرکانسی (RF)، سیستم خلاء، قطعات موجبری جهت انتقال توان RF به قسمت شتابگر و سیستم خنک کننده، مشخصات هر کدام از این قسمت­ها در پروژه مورد نظر آورده شده است. انرژی بیشینه 15 مگا الکترون­ولت با توان پالس 5/2 مگاوات RF در یک ساختار موج رونده که در فرکانس 2998مگا هرتز در مد  عمل می­کند، از مهم‌ترین مشخصات این شتاب‌دهنده است 1 One of the most commonly used types of accelerators is linear electron accelerator. There is a project is in progress in Institute for research in fundamental sciences (IPM) aiming to design and build such an accelerator. It is defined in such a way that all parts to be built in Iran as possibly as it can. In this paper, after a brief explanation of the components of an electron linear accelerator including the electron gun, accelerating tube, RF power supply, vacuum system, waveguide for transmitting RF power to accelerating tube, and cooling system specification of each of these components are presented. The maximum beam energy of 15 MeV and RF pulse power of 2.5 MW with a traveling wave structure at a frequency of 2998 MHz which is acted in π /2 mode are the most important features of this accelerator 205 213 محمد لامعی رشتی M Lamehi Rashti پژوهشکده ذرات و شتابگرها، پژوهشگاه دانش‌های بنیادی Iran mlamehi@aeoi.org.ir فریدون عباسی دوانی F Abbasi Davani گروه کاربرد پرتوها، دانشکده مهندسی هسته‌ای، دانشگاه شهید بهشتی Iran فرشاد قاسمی F Ghasemi گروه کاربرد پرتوها، دانشکده مهندسی هسته‌ای، دانشگاه شهید بهشتی Iran حامد شاکر H Shaker پژوهشکده ذرات و شتابگرها، پژوهشگاه دانش‌های بنیادی Iran ساسان احمدیان نمینی S Ahmadian Namini گروه کاربرد پرتوها، دانشکده مهندسی هسته‌ای، دانشگاه شهید بهشتی Iran electron linear accelerator Klystron lamp modulator buncher cavity 1. M Pierre Lapostolle and L Albert Septier, “Linear Accelerators, North-holland Publishing Company – Amsterdam (1970).##2. C J Karzmark, Department of Radiation Oncology, Stanford University School of Medicine, Medical Electron Accelerators, McGRAW hill, New York (1993).##3. M Chodorow, E L Ginzton, W Hansen, L Kyhl, B Neal and W K H Panofsk, Stanford High-Energy Linear Electron Accelerator, “The Review of Scientific Instrument”, 26, 2 (1955).##4. W Aldemar Scharf, “Particle Accelerators and Their Uses”, Harwood Academic Publishing, London (1986).##5. Iranian Light Source Conceptual Design, http.//ilsf.ipm.ac.ir##9. F Ghasemi, F Abbasi Davani, M Lamehi Rashti, S H Shaker, and S Ahmadiannamini, “Construction of Disk-loaded Buncher for S-Band Low Energy TW Electron Linac”, Proceedings of IPAC, USA (2012).##10. S H Shaker and F Ghasemi, “Design of a Pi/2 Mode S-Band Low Energy TW Electron Linear Accelerator”, MOPC009, Proceedings of IPAC San Sebastian, Spain (2011).##
0 بررسی روش‌های ساخت کاواک‌های شتاب‌دهنده خطی الکترون و پیاده‌سازی روش مناسب برای پروژه شتاب‌دهنده خطی پژوهشگاه‌ دانش‌های بنیادی Investigation of e-Linac tube construction method and implementation suitable method for IPM e-Linac https://ijpr.iut.ac.ir/article_1140.html 10.18869/acadpub.ijpr.15.2.215 0 هدف پروژه شتاب‌دهنده خطی الکترون پژوهشگاه دانش‌های بنیادی، طراحی شتاب‌دهنده‌ای است که تا حد ممکن اجزای مختلف آن در ایران ساخته شود.این شتاب‌دهنده از نوع موج رونده است. بررسی انجام گرفته نشان می‌دهد که انواع روش‌های شکل‌دهی و اتصال در ساخت کاواک‌های تیوب شتاب‌دهی وجود دارند. انتخاب روش انقباض در ساخت تیوب شتاب‌دهی پروژه موردنظر با الگو برداری از شتاب‌دهنده مارک 3 در دانشگاه استنفورد بوده است. با موفقیت در ساخت آزمایشی تیوب با تعداد 8 کاواک و یافتن مشکلات این روش، ساخت تیوب شتاب‌دهی نهایی با تعداد 24 کاواک انجام شد. نتیجه ارائه شده در این مقاله نشان می‌دهد که بسامد 5/2996 مگاهرتز و ضریب کیفیت 11200 از تیوب ساخته شده به دست آمده که مقادیر مطلوب در طراحی را تامین می‌کند 1 The goal of electron linear accelerator project in institute for research in fundamental sciences(IPM) is to build its components as many as they can in Iran. This accelerator is a traveling wave type. Investigations show that there are various techniques in forming and connecting the accelerating tube cavities. The shrinking method applied for constructing the accelerating tube is selected based on the one applied for Stanford University’s Mark III accelerator. With success in building an 8-cavity test tube and finding the problems of the method, the construction of the final accelerating tube with 24 cavities has been accomplished. The results show that the obtained frequency of 2996.5 MHz and quality factor of 11200, satisfy the design desired values. 215 223 فرشاد قاسمی F ghasemi 1. گروه کاربرد پرتوها، دانشکده مهندسی هسته‌ای، دانشگاه شهید بهشتی Iran فریدون عباسی دوانی F abasidavani 1. گروه کاربرد پرتوها، دانشکده مهندسی هسته‌ای، دانشگاه شهید بهشتی Iran fabbasi@sbu.ac.ir محمد لامعی رشتی M lamehirachti 2. پژوهشکده فیزیک و شتابگرها، پژوهشگاه دانش‌های بنیادی Iran ساسان احمدیان نمینی S ahmadiannamini 1. گروه کاربرد پرتوها، دانشکده مهندسی هسته‌ای، دانشگاه شهید بهشتی Iran electron linear accelerator Resonant frequency quality factor shrinking method 1. Pierre M Lapostolle and Albert L Septier “Linear Accelerators” North-Holland Publishing Company Amsterdam (1970).##2. Waldemar Scharf, “Particle Accelerators And Their Uses” Harwood Academic Publishing, London (1986).##3. C J Karzmark, “Medical Linear Accelerator”, Department of Radiation Oncology, Stanford University School of Medicine, Medical Electron Accelerators, McGRAW hill- New York (1993).##5. G Waldschmidt, J J Song, A Nassiri, R L Kustom, and Y W Kang, “The Design and Fabrication of a Millimeter Wave Linear Accelerator” Argonne National Laboratory, Advanced Photon Source (1997).##8. S H Shaker, F Ghasemi “Design of a Pi/2 Mode S-Band Low Energy TW Electron Linear Accelerator/MOPC009” Proceedings of IPAC2011, San Sebastian, Spain (2011).##9. I Wilson, “Cavity Construction Techniques” Technical Report, CERN, Geneva, (2005).##10. E Jensen, Fabrication and testing of RF structures (LEC5),Technical Report, CERN, (2003)##12. M Chodorow, E L Ginzton, W Hansen, L Kyhl, B Neal, and W K H Panofsk Stanford High-Energy Linear Electron Accelerator (Mark III), “The review of Scientific Instrument” 26, 2 (1955).##
0 طراحی شتاب‌دهنده سیکلوترون 10 مگا الکترون‌ ولت Design of 10 MeV cyclotron accelerator https://ijpr.iut.ac.ir/article_1141.html 10.18869/acadpub.ijpr.15.2.225 0 پروژه طراحی و ساخت سیکلوترون 10 مگا الکترون‌ولت از سال 1391 با محوریت دانشگاه صنعتی امیرکبیر و همکاری دانشگاه­های دیگر آغاز شده و تاکنون فاز طراحی مفهومی و مهندسی آن به پایان رسیده است. هدف اصلی این سیکلوترون کوچک، ایجاد باریکه پروتون جهت تولید رادیوایزوتوپ­های مورد استفاده در دستگاه PET می­باشد. این سیکلوترون از قسمت­های مختلفی مانند مگنت، کاواک، چشمه یونی، سامانه RF و LLRF، سامانه خلأ، سامانه خنک­کننده، سامانه تقویت­کننده توان و سامانه منابع تغذیه تشکیل شده است. در این مقاله، مختصری از مبانی طراحی پیکره اصلی سیکلوترون و نتایج نهایی شبیه­سازی آن­ها ارائه شده است. لازم به ذکر است که این شبیه­سازی­ها با دقیق­ترین نرم‌افزارها همچون TOSCA،ANSYS ، HFSS، SolidWorks و CST انجام و بهینه شده است. همچنین امکان­سنجی ساخت تمام قطعات، انجام شده و ابعاد و پارامترهای اجزای مختلف دستگاه با استانداردهای ساخت هماهنگ شده است 1 Design and construction of 10MeV cyclotron has been started at Amirkabir University of Technology since 2012. So far, the conceptual and detail engineering design phases have been finalized. The main purpose of this baby cyclotron is to generate proton beam for the production of PET radioisotopes. The cyclotron consists of magnet, cavity, ion source, RF and LLRF system, vacuum system, cooling system, power amplifiers and power supplies system. In this paper, a brief of design principles for all the parts of cyclotron and their final simulation results is presented. It should be noted that these simulations have been performed and optimized by the most accurate softwares such as TOSCA, ANSYS, HFSS, SolidWorks and CST. Also, the manufacturing feasibility of all the parts is performed and their dimensions and parameters are synchronized with manufacturing standards 225 234 راحله صلح‌جو R Solhju 1دانشکده مهندسی انرژی و فیزیک، دانشگاه صنعتی امیرکبیر، خیابان حافظ، تهران Iran محمدرضا اسدی M R Asadi 1دانشکده مهندسی انرژی و فیزیک، دانشگاه صنعتی امیرکبیر، خیابان حافظ، تهران Iran سعید صابونچی S Sabounchi 1دانشکده مهندسی انرژی و فیزیک، دانشگاه صنعتی امیرکبیر، خیابان حافظ، تهران Iran فرزاد ذاکر حسینی F Zaker Hosseini 1دانشکده مهندسی انرژی و فیزیک، دانشگاه صنعتی امیرکبیر، خیابان حافظ، تهران Iran ماندانا صالحی M Salehi 1دانشکده مهندسی انرژی و فیزیک، دانشگاه صنعتی امیرکبیر، خیابان حافظ، تهران Iran علی عبدالرحمن A Abdorrahman 1دانشکده مهندسی انرژی و فیزیک، دانشگاه صنعتی امیرکبیر، خیابان حافظ، تهران Iran محسن نیکبخت M Nikbakht 1دانشکده مهندسی انرژی و فیزیک، دانشگاه صنعتی امیرکبیر، خیابان حافظ، تهران Iran سیده زهرا کراری Z Karrari 1دانشکده مهندسی انرژی و فیزیک، دانشگاه صنعتی امیرکبیر، خیابان حافظ، تهران Iran حسین آفریده H Afarideh 1دانشکده مهندسی انرژی و فیزیک، دانشگاه صنعتی امیرکبیر، خیابان حافظ، تهران Iran hafarideh@aut.ac.ir میترا قرقره‌چی M Ghergherehchi 2دانشکده مهندسی برق و الکترونیک، دانشگاه Sungkyunkwan، سوان، کرهجنوبی Iran accelerator cyclotron magnet cavity PIG ion source RF system TOSCA software 1. V Sabaiduc, “New High Intensity Compact Negative Hydrogen Ion Cyclotrons”, Proceeding Cyclotrons, Lanzhou, China, MOPCP017 (2010).##2. R Solhju, JKPS, 63 (2013).##3. S Zaremba, \"Magnet for Cyclotrons\", CERN-2006-012 )2006(.##4. B Qin, Nucl. Instr. and Meth. in Phys. Research A, 620 )2010(.##5. John J Livingood; “Principle of Cyclic Particle Accelerators”, D Van Nostrand Company, INC )1961(.##6. J H Oh, “Design Of Rf System For Compact AVF Cyclotron”, of Proceeding Cyclotrons, Lanzhou, China, MOPCP024 (2010).##7. V Afzalan, “Design And Simulation Of Cavity For 10mev Compact Cyclotron”, of Proceeding Cyclotrons, Vancouver, Canada, TUPPT024 (2013).##8. I G Brown, “The Physics and Technology of Ion Sources”, John Wiley & Sons, Singapore (1988).##9. S H Lee, “Development Of 20kw Rf Amplifier For Compact Cyclotron”, Proceeding Cyclotrons, Vancouver, Canada, TUPPT028 (2013).##10. A Abdorrahman, “Control System of 10MeV Baby Cyclotron”, of Proceeding Cyclotrons, Canada, TUPPT001 (2013).##
0 نگاهی جدید در طراحی مدار بسامد رادیویی سطح پایین کارا برای سیکلوترون 10 مگا الکترون ولت New approach in design of efficient low level RF circuit for 10 MeV cyclotron https://ijpr.iut.ac.ir/article_1142.html 10.18869/acadpub.ijpr.15.2.235 0  در سیکلوترون‌‌ها ذره باردار در میدان الکتریکی که در کاواک برقرار است، شتاب می‌بیند و در میدان مغناطیسی که بین مگنت‌ها برقرار است، تغییر مسیر می‌دهد. برای برقراری RF میدان الکتریکی در کاواک، باید یک سیگنال بسامد رادیویی یا بدون نویز را تولید و تقویت کرده و به کاواک ارسال نمود. بسامد تشدید کاواک بر اثر تغییرات دمایی تغییر کرده و منجر به ایجاد توان انعکاسی می‌گردد، در این کار مدار بسامد رادیویی سطح پایین1 طراحی گردیده که وظیفه آن تولید سیگنال، تنظیم فاز و بسامد آن، تنظیم بسامد تشدید کاواک، حفاظت مجموعه از توان انعکاسی در حداکثر توان RFو پایدار نگه داشتن مجموعهمی‌باشد 1 The electric field in cavity accelerates charged particles and magnetic field of magnets changes the direction of these particles in cyclotrons. In order to establish the electric field inside the cavity, a noiseless radio frequency (RF) signal should be generated, amplified and sent to cavity. The resonant frequency of the cavity could be changed by temperature variation. Variation of resonant frequency will cause reflected power from the cavity. in this work the low level RF circuits with task of signal generation, phase and frequency Adjustment, cavity resonant frequency Adjustment, protection of the RF set from the reflected power and stability of RF system was designed 235 242 محمدصالح شریفی اسدی ملفه M S Sharifi Asadi Malafeh دانشکده مهندسی انرژی و فیزیک، دانشگاه صنعتی امیرکبیر، خیابان حافظ، تهران، صندوق پستی 4413-15875 Iran حسین آفریده H Afarideh دانشکده مهندسی انرژی و فیزیک، دانشگاه صنعتی امیرکبیر، خیابان حافظ، تهران، صندوق پستی 4413-15875 Iran hafarideh@aut.ac.ir میترا قرقره‌چی M Ghergherehchi دانشکده مهندسی انرژی و فیزیک، دانشگاه صنعتی امیرکبیر، خیابان حافظ، تهران، صندوق پستی 4413-15875.دانشکده مهندسی برق و الکترونیک، دانشگاه Sungkyunkwan، سوان، کره جنوبی Iran جونگ سو چای J Seo Chai دانشکده مهندسی برق و الکترونیک، دانشگاه Sungkyunkwan، سوان، کره جنوبی Iran reflected power resonance frequency RLC equivalent circuit synthesizers serial communication 1. N R Usher Digital Low-Level Radio Frequency Control and Microphonics Mitigation of Superconducting Cavities##2. Analog Devices, Inc., “AD9859 Datasheet”, (2009); http://www.analog.com.##3. A Compact Solution for DDS-Generator, Turn-On and Protections in Radio Frequency Accelerator Systems Caruso#, F. Consoli, A. Spartà, INFN-LNS, Catania, Italy , A. Longhitano, ALTEK, S. Gregorio di Catania, Italy##4. W Xiulong, Z Zhenlu, et al., Nuclear Instruments and Methods in Physics Research B 261 (2007) 70.##5. Design, Analysis and Implementation of a Versatile Low Level Radio Frequency System for Accelerating Cavities by HoomanHassanzadegan##6. Analog Devices, Inc., “AD8302 Datasheet”, 2009; http://www.analog.com.##7. Low Level rf Control System for Cyclotron 10MEVJiang Huang , Tongning Hu, Dong Li, Kaifeng LiuHuazhong University of Science and Technology, Wuhan, Hubei 430074, China##8. RF applications in digital signal processing T. SchilcherPaul ScherrerInstitut, Villigen, Switzerland##9. Digital Phase Detection In a Variable Frequency RF System By Adam Molzahn##10. New Technologies in the Design of rf Controls for Acceleratorsk. Fong, TRIUMF, Vancouver, Canada.##11. Proceedings of Cyclotrons, Lanzhou, China (2010)##12. Analog Devices, Inc., “AD8367 Datasheet”, (2001) ;http://www.analog.com.##13. Development of 12KW rf Power Supply for Cychu-10Cyclotrond. Li#, T. Hu, J. Huang, K. Liu, J. Yang, B. Qin, L. YangHuazhong University of Science and Technology, Wuhan, 430074, China##14. Analog Devices, Inc., “AD8361 Datasheet”, (2009); http://www.analog.com##
0 طراحی و شبیه‌سازی شتاب‌دهنده داینامیترون 800 کیلو ولتی با نرم افزار CST Design & simulation of a 800 kV dynamitron accelerator by CST studio https://ijpr.iut.ac.ir/article_1143.html 10.18869/acadpub.ijpr.15.2.243 0 استفاده از شتاب‌دهنده­های الکترواستاتیک با انرژی متوسط در صنعت بسیار مورد توجه قرار گرفته است. دلیل این امر بازدهی بالا و قیمت مناسب این نوع شتاب­دهنده­ها  سایر شتاب‌دهنده‌ها است.  این مقاله، ابتدا کاربرد و اهمیت ساخت شتاب­دهنده الکترواستاتیک با انرژی مطرح می­گرددkeV 800در این مقاله، ابتدا کاربرد و اهمیت ساخت شتاب­دهنده الکترواستاتیک با انرژی CST STUDIO SUITEدر ادامه طراحی و شبیه سازیجفت‌شدگی خازنی شتاب­دهنده داینامیترون و همچنین شبیه­سازی باریکه الکترونی به وسیله نرم‌افزار ارائه می­شود 1 Nowadays, middle energy electrostatic accelerators in industries are widely used due to their high efficiency and low cost compared with other types of accelerators. In this paper, the importance and applications of electrostatic accelerators with 800 keV energy are studied. Design and simulation of capacitive coupling of a dynamitron accelerator is proposed. Furthermore, accelerating tube are designed and simulated by means of CST Suit Studio 243 251 سیدعبدالمهدی آقایان A M Aghayan شرکت ساخت و توسعه شتاب‌دهنده‌ها و کاربرد آن‌ها، سازمان انرژی اتمی ایران Iran حمیدرضا مرادی H R Moradi شرکت ساخت و توسعه شتاب‌دهنده‌ها و کاربرد آن‌ها، سازمان انرژی اتمی ایران Iran حامد نوری H Nouri شرکت ساخت و توسعه شتاب‌دهنده‌ها و کاربرد آن‌ها، سازمان انرژی اتمی ایران Iran امیرحسین میردامادی A H Mirdamadi شرکت ساخت و توسعه شتاب‌دهنده‌ها و کاربرد آن‌ها، سازمان انرژی اتمی ایران Iran محمد لامعی رشتی M Lamei rashti پژوهشگاه علوم و فنون هسته‏ای، سازمان انرژی اتمی ایران Iran فرشاد قاسمی F Ghasemi شرکت ساخت و توسعه شتاب‌دهنده‌ها و کاربرد آن‌ها، سازمان انرژی اتمی ایران Iran farshad.sadeghipanah@gmail.com electrostatic accelerator capacitive coupling accelerating tube CST Studio Suite 1. R Hellborg, “Electrostatic Accelerators: Fundamentals and Applications”, Springer (2005).##2. E Cottereau, "DC Accelerators Technical Report", (2001).##3. R Galloway, T Lisanti, and M Cleland, Radiation Physics and Chemistry, 71 (2004) 551.##4. S R Ghodke, et al., Asian Particle Accelerator Conference (2007) THPMA094.##5. P Hanley, M Cleland, C Mason, K Morganstern, and C Thompson, Nuclear Science, IEEE Transactions, 16 (1969) 90.##6. R Banwari, et al., Proceeding of Asian Particle Accelerator Conference, (2007) THPMA039.##7. F Hinterberger, Proceedings of CERN Accelerator School, Small Accelerators, Zeegse, The Netherlands, 24 May-2 June (2005) 95.##8. J Kuffel, E Kuffel, and W Zaengl, “High Voltage Engineering Fundamentals”, Newnes (2000).##9. C C Thompson and M R Cleland, Nuclear Science, IEEE Transactions 16, 3 (1969) 124##
0 اندازه‌گیری نیم‌رخ باریکه شتاب دهنده 200ES- با استفاده از نمایشگر الکترون ثانویه Beam profile measurement of ES-200 using secondary electron emission monitor https://ijpr.iut.ac.ir/article_1144.html 10.18869/acadpub.ijpr.15.2.253 0 ابزارهای مختلفی برای اندازه‌گیری نیم‌رخ باریکه ساخته شده است. نمایشگرهای الکترون ثانویه یکی از ابزارهایی هستند که برای این هدف مورد استفاده قرار می‌گیرند. در 200ES-این مقاله طراحی و ساخت نمایشگر الکترون ثانویه برای اندازه‌گیری نیم‌رخ باریکه شتاب‌دهنده الکترواستاتیکمورد بررسی قرار می‌گیرد. شبکه‌های مشبک این ساختار شامل 16 سیم افقی و 16 سیم عمودی هستند که نسبت به یکدیگر عایق شده‌اند. باریکه با جریان بیشینهو انرژی حداکثر μA400 keV200 به سیم‌ها برخورد کرده و بار سیم‌ها توسط سیستم الکترونیکی مبدل جریان به ولتاژ جمع‌آوری می‌شود. داده‌های آنالوگ توسط چهار عدد مالتی پلکسر به ریزپردازنده انتقال 232RSیافته و دیجیتال می‌شوند. داده‌ها از طریق به برنامه کامپیوتری که بدین منظور نوشته شده است انتقال یافته و نیم‌رخ باریکه  را می‌توان مشاهده نمود  1 Up to now, different designs have been introduced for measurement beam profile accelerators. Secondary electron emission monitors (SEM) are one of these devices which have been used for this purpose. In this work, a SEM has been constructed to measure beam profile of ES-200 accelerator, a proton electrostatic accelerator which is installed at SBU. Profile grid for both planes designed with 16 wires which are insulated relative to each other. The particles with maximum energy of 200 keV and maximum current of 400 μA are stopped in copper wires. Each of the wires has an individual current-to-voltage amplifier. With a multiplexer, the analogue values are transported to an ADC. The ADCs are read out by a microcontroller and finally profile of beam shows by a user interface program 253 258 احسان ابراهیمی بسابی E Ebrahimi Basabi دانشکده مهندسی هسته‌ای، دانشگاه شهید بهشتی، ولنجک، تهران Iran سید امیرحسین فقهی A H Feghhi دانشکده مهندسی هسته‌ای، دانشگاه شهید بهشتی، ولنجک، تهران Iran a.feghhi@gmail.com محسن نیکبخت M Nikhbakht دانشکده مهندسی هسته‌ای، دانشگاه شهید بهشتی، ولنجک، تهران Iran مهدی شفیعی M Shafiee مرکز دانش‌های بنیادی، بلوار ارتش، تهران Iran beam diagnostic SEM electrostatic accelerator 1. P Strehl, “Beam Instrumentation and Diagnostics”, Chap 4, (2006) 105.##2. Peter Forck, “Lecture Notes on Beam Diagnostic and Instruments”, Joint University Accelerator School, (2011) 78.##3. J Camas, G Ferioli, J J Gras, R Jung, “Screens Versus SEM Grids”, DIPAC,Travemunde (1995).##4. D Belver et al., “Design And Mesurement Of A Test Stand For The Sem-Gird System Of The Ess-Bilbao”, Proceeding of IPAC2012, New Orleans, Louisiana, USA (2012).##5. L Bernard, et al., “Wide Dynamic Range Beam Position and Profile Measurement for the CERN LEAR”, PAC, Santa Fe )1983(.##6. J Rahighi, M Jafarzadeh Khatibani, S M Sadati, H Ghods, Journal of Nuclear Sci. and Tech 57 (2011)##7. www.srim.org##8. B Denise Pelowitz, “MCNPX User\'s Manual, Version 2.6.0”, Los Alamos National Laboratory (2008).##
0 بررسی وضعیت شتاب‌دهنده خطی الکترون در درمان سرطان در ایران Status of medical electron linear accelerator for cancer treatment in Iran https://ijpr.iut.ac.ir/article_1145.html 10.18869/acadpub.ijpr.15.2.259 0 استفاده از شتاب‌دهنده‌های خطـی الکـترون، کاربردی‌ترین روش در پرتودرمانی1 سرطان‌ها محسوب می‌شود. هم‌اکنون حدود 52 درصد از بیماران سرطانی از این روش در فرایند درمان خود استفاده می‌کنند. با این وجود، در بسیاری از کشورهای در حال توسعه امکانات پرتودرمانی کافی وجود ندارد. به طوری‌که، در بررسی‌های اخیر در سطح جهان، کمبود پنج هزار سیستم پرتودرمانی مگاولتاژ گزارش شده است. طبق استانداردهای بین‌المللی برای هر 180000 نفر یک دستگاه شتاب‌دهنده خطی پزشکی مورد نیاز می‌باشد. در ایران، سرطان، سومین علت مرگ و میر پس از بیماری قلبی و عروقی و حوادث شناخته شده است. گزارش کمی از وضعیت ایران در زمینه تعداد شتاب‌دهنده‌های خطی الکترون پزشکی از نتایج این مقاله است 1 Medical electronlinear accelerators are the most practical radiotherapy facilities in cancer treatment. About 52 percent of patients are treated by these radiotherapy systems during their treatment process. However, in developing countries there are not enough systems and recent studies reported the shortage of 5000 megavoltage radiotherapy accelerators all over the world. According to international standards, there is a need of one medical linac for 180000 patients. In Iran, cancer is the third cause of death after cardiovascular diseases and accidents. This study indicates the number and status of medical electron accelerators in radiotherapy centers in Iran 259 268 مهناز منتظم M Montazam معاونت توسعه کاربرد پرتوها، سازمان انرژی اتمی ایران Iran mah.montazam@gmail.com سیدربیع مهدوی R Mahdavi دانشکده پیراپزشکی، دانشگاه علوم پزشکی ایران Iran فرشاد قاسمی F Ghasemi معاونت توسعه کاربرد پرتوها، سازمان انرژی اتمی ایران Iran medical linear accelerator radiotherapy megavoltage 1. Richard Pazdur et al., “Cancer Management: A Multidisciplinary Approach”, 10th Edition )2008(.##2. D Baltas et al., “The Physics of Modern Brachytherapy for Oncology”, CRC Press (2007).##3. E B Podgorsak, “Radiation Oncology Physics”: A Handbook for Teachers and Students, International Atomic Energy Agency, Chapter 5 (2005).##4. A L Baert et al., “New Technologies in Radiation Oncology”, Springer (2006).##5. C John Ford, Microwave Electron Linac in the Treatment of Cancer, IEEE, Chicago (2001).##6. C J Karzmark et al., “Medical linear Accelerators”, Stanford University of Medicine (1993)##
0 ارزیابی عملکرد اولین سیکلوترون بیمارستانی نصب شده در بیمارستان دکتر مسیح دانشوری جهت تولید رادیوایزوتوپ‌های پوزیترون زا Performance evaluation of the first hospital cyclotron installed in masih Daneshvari hospital for production of positron emitter radioisotopes https://ijpr.iut.ac.ir/article_1146.html 10.18869/acadpub.ijpr.15.2.269 0  اولین سیکلوترون بیمارستانی حفاظ‌دار با مدل GE PET Trace 700 در بیمارستان دکتر مسیح دانشوری در سال 1391 نصب گردید. از آنجائی که انجام آزمون‌های پذیرش پس از نصب دستگاه به منظور مقایسه کارایی سیستم با ادعاهای شرکت سازنده لازم الاجرا می‌باشد آزمون‌های فوق الذکر انجام شد و آهنگ تولید گاما و نوترون در حین بمباران به منظور تولید فلورین 18 و نیتروژن 13در بونکر سیکلوترون به عنوان تابعی از فاصله و در جریان‌های هدف کاربردی مورد ارزیابی قرارگرفت. در این تحقیق مشاهده شد که مقدار فعالیت رادیواکتیو تولیدی بر اساس دستورالعمل‌های استاندارد شرکت سازنده 32/2858، 15/138 و 5/1047 میلی کوری به ترتیب برای فلورین 18، نیتروژن 13 و کربن 11 می‌باشد که بالاتر از گزارش‌های ارائه شده توسط کارخانه سازنده می‌باشد و مشخص گردید که در فاصله یک متری از کابینت پشتیبان هدف در جریان 35 میکروآمپر روی هدف فلورین 18، آهنگ تولید نوترون 8/13 میکروسیورت بر ساعت می‌باشد و با افزایش فاصله از 5/0به 5/2 متر در مجاورت اتصال دو درب سیکلوترون در جریان هدف 35 میکروآمپر به منظور تولید نیتروژن 13 آهنگ تولید گاما از 6/8 به 2 میکروسیورت بر ساعت کاهش می‌یابد. این مطالعه نشان داد که آهنگ تولید دوز در این نوع سیکلوترون به علت حفاظ دار بودن در طی بمباران بالا نیست 1 It is well known that the acceptance tests should be done when a cyclotron installed in order to measure the performance claimed by manufacturer. As well as the photon and neutron dose rate during the production of flourin-18 and nitrogen-13 in self shield cyclotron in Masih Daneshvari hospital have been measured as function of distance and beam current. The first Self-shield hospital cyclotron (GE PET Trace 700) has been installed in Masih Daneshvari hospital in 2012. The yield performance of 2858.32, 138.15 and 1047.5 mCi has been measured for 18F–, 13N-13NH3 and 11C-11CO2 respectively. In flourin-18 target, the neutron dose rate observed 13.8 µSv/h at 35 µA target current at the distance of 1 m of near to the target support cabinet. With increasing of distance from 0.5 to 2.5 m near the cyclotron doors at 35 µA target current, the gamma dose rate decreases from 8.6 to 2 µSv/h in nitrogen-13 target. The measured yield for all tracers was higher than the value reported by manufacturer and the amount of shielding in GE PET Trace 700 is enough to have safe dose rate during production 269 277 acceptance test cyclotron neutron dose rate gamma dose rate flourin-18 nitrogen-13 1. International Atomic Energy Agency, “Cyclotron Produced Radionuclides: Principles and Practice”, Technical Reports Series No. 465, IAEA (2008).##2. International Atomic Energy Agency, “Cyclotron Produced Radionuclides: Guidance on Facility Design and Production of [18F] Fluorodeoxyglucose (FDG)”, IAEA Radioisotopes and Radiopharmaceuticals Series No. 3, IAEA (2012).##3. International Atomic Energy Agency, “Cyclotron Produced Radionuclides: Operation and Maintenance of Gas and Liquid Targets”, IAEA Radioisotopes and Radiopharmaceuticals Series No. 4, IAEA (2012).##4. GE Healthcare, “MINItrace (PET Tracer Production System) Technical Specification”, Technical Publications, General Electric Company (2009).##5. GE Healthcare, MINItrace (PET Tracer Production System) Operator Guide”, General Electric Company, (2010).##6. GE Healthcare, “MINItrace (PET Tracer Production System) Service Manual-Health and Safety”, Technical Publications, General Electric Company (2005).##