<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ArticleSet PUBLIC "-//NLM//DTD PubMed 2.7//EN" "https://dtd.nlm.nih.gov/ncbi/pubmed/in/PubMed.dtd">
<ArticleSet>
<Article>
<Journal>
				<PublisherName>The Physics Society of Iran</PublisherName>
				<JournalTitle>Iranian Journal of Physics Research</JournalTitle>
				<Issn>1682-6957</Issn>
				<Volume>21</Volume>
				<Issue>2</Issue>
				<PubDate PubStatus="epublish">
					<Year>2021</Year>
					<Month>08</Month>
					<Day>23</Day>
				</PubDate>
			</Journal>
<ArticleTitle>The effect of palladium doping on optical and electrochromic properties of sol-gel ‎deposited tungsten oxide films</ArticleTitle>
<VernacularTitle>The effect of palladium doping on optical and electrochromic properties of sol-gel ‎deposited tungsten oxide films</VernacularTitle>
			<FirstPage>377</FirstPage>
			<LastPage>390</LastPage>
			<ELocationID EIdType="pii">1702</ELocationID>
			
<ELocationID EIdType="doi">10.47176/ijpr.21.2.04913</ELocationID>
			
			<Language>FA</Language>
<AuthorList>
<Author>
					<FirstName>Sh</FirstName>
					<LastName>Hajian</LastName>
<Affiliation>‎‎ Department of Physics, Isfahan University of Technology, Isfahan, Iran‎</Affiliation>

</Author>
<Author>
					<FirstName>M</FirstName>
					<LastName>Ranjbar</LastName>
<Affiliation>‎‎ Department of Physics, Isfahan University of Technology, Isfahan, Iran‎</Affiliation>

</Author>
<Author>
					<FirstName>H</FirstName>
					<LastName>Salamati</LastName>
<Affiliation>‎‎ Department of Physics, Isfahan University of Technology, Isfahan, Iran‎</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2019</Year>
					<Month>05</Month>
					<Day>20</Day>
				</PubDate>
			</History>
		<Abstract>In this paper, palladium doped-tungsten oxide thin films have been prepared by sol-gel deposition method. In this way, tungstic ‎acid obtained by Kudo method was doped by different amounts of palladium chloride and were deposited on transparent ‎conductive oxide of ITO/glass by dip-coating method. The effect of Pd doping on morphology and optical properties as well as ‎electrochemical characteristics were investigated using scanning electron microscopic (SEM), UV-Vis spectroscopy, cyclic ‎voltammetry (CV) and optical transmission at 632.8 nm constant wavelength. SEM revealed that the WO3 layers have a thickness ‎of 450-500 nm were obtained with smooth and uniform surfaces. Also, the transparency of layers was above 85%, for which the ‎optical gap was decreased by increasing Pd content. The voltammetry results showed that the doped palladium reduces the ‎catholic potential, increases the chemical stability of tungsten oxide thin films, stabilizing the electrochemical performance of ‎these layers. Finally, we measured the electrochromic response time and the corresponding electrochemical efficiencies</Abstract>
			<OtherAbstract Language="FA">In this paper, palladium doped-tungsten oxide thin films have been prepared by sol-gel deposition method. In this way, tungstic ‎acid obtained by Kudo method was doped by different amounts of palladium chloride and were deposited on transparent ‎conductive oxide of ITO/glass by dip-coating method. The effect of Pd doping on morphology and optical properties as well as ‎electrochemical characteristics were investigated using scanning electron microscopic (SEM), UV-Vis spectroscopy, cyclic ‎voltammetry (CV) and optical transmission at 632.8 nm constant wavelength. SEM revealed that the WO3 layers have a thickness ‎of 450-500 nm were obtained with smooth and uniform surfaces. Also, the transparency of layers was above 85%, for which the ‎optical gap was decreased by increasing Pd content. The voltammetry results showed that the doped palladium reduces the ‎catholic potential, increases the chemical stability of tungsten oxide thin films, stabilizing the electrochemical performance of ‎these layers. Finally, we measured the electrochromic response time and the corresponding electrochemical efficiencies</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">palladium</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">tungsten oxide</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Sol-gel</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">electrochromic</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">‎‏ ‏SEM‎</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://ijpr.iut.ac.ir/article_1702_b9f94c77652c9a76fc8a442748cd54bd.pdf</ArchiveCopySource>
</Article>
</ArticleSet>
