The Physics Society of Iran Iranian Journal of Physics Research 1682-6957 23 3 2023 11 22 Graphitic carbon nitride/MIL-88B(Fe) nanocomposite for methylene blue dye removal from aqueous solution by UV-visible light active photo-Fenton Reaction Graphitic carbon nitride/MIL-88B(Fe) nanocomposite for methylene blue dye removal from aqueous solution by UV-visible light active photo-Fenton Reaction 107 114 3430 10.47176/ijpr.23.3.11632 FA Sediqa Alijani College of Agriculture and Natural Resources, University of Tehran, Karaj, Iran Amene Naseri Agricultural Biotechnology Research Institute of Iran (ABRII), Agricultural Research, Education, and Extension Organization (AREEO), Karaj, 3135933151, Iran 0000-0003-3102-8906 Amir Hossein Hamidian College of Agriculture and Natural Resources, University of Tehran, Karaj, Iran Journal Article 2023 01 16 In the present research, g-C<sub>3</sub>N<sub>4</sub>/MIL-88B(Fe) nanocomposite photocatalyst was successfully synthesized by the solvothermal method. The morphology, crystal structure, chemical functionalities, and optical properties of the obtained nanocomposite were investigated by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and UV-Vis diffuse reflectance spectroscopy (DRS), respectively. According to the SEM and TEM images, spindle-shaped MIL-88B(Fe) nanostructures were synthesized with an average length and width of 2 and 1 μm, respectively. Furthermore, g-C<sub>3</sub>N<sub>4</sub> nanoparticles with an average diameter of 30 nm were observed on the surface of the MIL-88B(Fe). Based on the XRD results, the presence of both g-C<sub>3</sub>N<sub>4</sub> and MIL-88B(Fe) nanostructures in the prepared composite was confirmed. Also, the presence of functional groups of the MIL-88B(Fe) and g-C<sub>3</sub>N<sub>4</sub> was determined by FTIR. Based on DRS analysis and Tauc's plot, the band gap energy of the prepared composite was measured as 2.1 eV, which indicated that the prepared composite could absorb light in the visible region. The degradation of organic pollutant methylene blue (MB) in the g-C<sub>3</sub>N<sub>4</sub>/MIL- 88B(Fe)+light+H<sub>2</sub>O<sub>2</sub> system was investigated to evaluate the photo-Fenton activity of the prepared composite in comparison with light and light+H<sub>2</sub>O<sub>2</sub> systems. The results showed that the presence of g-C<sub>3</sub>N<sub>4</sub>/MIL-88B(Fe) composite increased the degradation rate of MB pollutant under the photo-Fenton process by 8.1 and 2.8 times higher than the mentioned systems, respectively. Thus, MB removal efficiency reached 100% within 20 min of illumination. The superiority of the g-C<sub>3</sub>N<sub>4</sub>/MIL-88B(Fe)+light+H<sub>2</sub>O<sub>2</sub> system can be attributed to the retardation of electron-hole recombination due to the presence of two nanostructures of g-C<sub>3</sub>N<sub>4</sub> and MIL-88B(Fe) in heterojunction, which has led to an increase in the efficiency of the photo-Fenton reaction. In the present research, g-C<sub>3</sub>N<sub>4</sub>/MIL-88B(Fe) nanocomposite photocatalyst was successfully synthesized by the solvothermal method. The morphology, crystal structure, chemical functionalities, and optical properties of the obtained nanocomposite were investigated by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and UV-Vis diffuse reflectance spectroscopy (DRS), respectively. According to the SEM and TEM images, spindle-shaped MIL-88B(Fe) nanostructures were synthesized with an average length and width of 2 and 1 μm, respectively. Furthermore, g-C<sub>3</sub>N<sub>4</sub> nanoparticles with an average diameter of 30 nm were observed on the surface of the MIL-88B(Fe). Based on the XRD results, the presence of both g-C<sub>3</sub>N<sub>4</sub> and MIL-88B(Fe) nanostructures in the prepared composite was confirmed. Also, the presence of functional groups of the MIL-88B(Fe) and g-C<sub>3</sub>N<sub>4</sub> was determined by FTIR. Based on DRS analysis and Tauc's plot, the band gap energy of the prepared composite was measured as 2.1 eV, which indicated that the prepared composite could absorb light in the visible region. The degradation of organic pollutant methylene blue (MB) in the g-C<sub>3</sub>N<sub>4</sub>/MIL- 88B(Fe)+light+H<sub>2</sub>O<sub>2</sub> system was investigated to evaluate the photo-Fenton activity of the prepared composite in comparison with light and light+H<sub>2</sub>O<sub>2</sub> systems. The results showed that the presence of g-C<sub>3</sub>N<sub>4</sub>/MIL-88B(Fe) composite increased the degradation rate of MB pollutant under the photo-Fenton process by 8.1 and 2.8 times higher than the mentioned systems, respectively. Thus, MB removal efficiency reached 100% within 20 min of illumination. The superiority of the g-C<sub>3</sub>N<sub>4</sub>/MIL-88B(Fe)+light+H<sub>2</sub>O<sub>2</sub> system can be attributed to the retardation of electron-hole recombination due to the presence of two nanostructures of g-C<sub>3</sub>N<sub>4</sub> and MIL-88B(Fe) in heterojunction, which has led to an increase in the efficiency of the photo-Fenton reaction. Environmental Remediation g-C3N4 Nanosheets MIL-88B(Fe) Photo-Fenton Catalyst Visible-light https://ijpr.iut.ac.ir/article_3430_2d2c8394e31101a261abf1784302bf75.pdf