Authors
Abstract
One of the most commonly used types of accelerators is linear electron accelerator. There is a project is in progress in Institute for research in fundamental sciences (IPM) aiming to design and build such an accelerator. It is defined in such a way that all parts to be built in Iran as possibly as it can. In this paper, after a brief explanation of the components of an electron linear accelerator including the electron gun, accelerating tube, RF power supply, vacuum system, waveguide for transmitting RF power to accelerating tube, and cooling system specification of each of these components are presented. The maximum beam energy of 15 MeV and RF pulse power of 2.5 MW with a traveling wave structure at a frequency of 2998 MHz which is acted in π /2 mode are the most important features of this accelerator
Keywords
2. C J Karzmark, Department of Radiation Oncology, Stanford University School of Medicine, Medical Electron Accelerators, McGRAW hill, New York (1993).
3. M Chodorow, E L Ginzton, W Hansen, L Kyhl, B Neal and W K H Panofsk, Stanford High-Energy Linear Electron Accelerator, “The Review of Scientific Instrument”, 26, 2 (1955).
4. W Aldemar Scharf, “Particle Accelerators and Their Uses”, Harwood Academic Publishing, London (1986).
5. Iranian Light Source Conceptual Design, http.//ilsf.ipm.ac.ir
9. F Ghasemi, F Abbasi Davani, M Lamehi Rashti, S H Shaker, and S Ahmadiannamini, “Construction of Disk-loaded Buncher for S-Band Low Energy TW Electron Linac”, Proceedings of IPAC, USA (2012).
10. S H Shaker and F Ghasemi, “Design of a Pi/2 Mode S-Band Low Energy TW Electron Linear Accelerator”, MOPC009, Proceedings of IPAC San Sebastian, Spain (2011).
)