Authors
Abstract
Tungsten oxide thin films were prepared by a cathodic electrodeposition method at -0.450 mV in order to investigate how water content affects their electrochromic properties. FESEM images exhibit that WO3 thin films consist of 65 nm uniform grains. Thin Films were electrochemically investigated in 0.1M LiClO4 in propylene carbonate electrolyte with and without 5vol% water content by cyclic voltammetry and chronoamperometry. The results indicate that tungsten oxide thin films exhibit faster switching time between coloration and bleaching states and also higher coloration efficiency in hydrated electrolyte.
Keywords
1) M. Gerosa, C. D. Valentin, G. Onida, C. E. Bottani, G. Pacchioni, J. Phys. Chem. C, 120 (2016) 11716.
2) Y. Wang, E. L. Runnerstrom, D. J. Milliron, Ann. Rev. Chembioeng., 7 (2016).
3) A. M. Österholm, D.E. Shen, J.A. Kerszulis, R.H. Bulloch; M. Kuepfert; A.L. Dyer, J.R. Reynolds, ACS Appl. Mater. Interfaces, 7 (2015) 1413.
4) C. G. Granqvist, Solar Energy Materials and Solar Cells, 92 (2008) 203.
5) C. G. Granqvist, Thin Solid Films, 564 (2014) 1.
6) O. Pyper, A. Kaschner, C. Thomsen, Solar Energy Materials and Solar Cells, 71 (2002) 511.
7) Sh. Cong, Y. Tian, Q. Li, Zh. Zhao and F. Geng, Advanced Materials, 26 (2014) 4260.
8) P. Judeinstein, J. Livage, Materials Science and Engineering B, 3 (1989) 129.
9) O. Bohnke, C. Bohnke, G. Robert, Solid State Ionics,6 (1982) 121.
10) T.J. Knowles, H.N. Hersh and W. W. Kramer, in: 19th Electronic Materials Conf. Aime, Cornell, N.Y. (1977).
11) I. Shiyanovskaya, M. Hepel and E. Tewksburry, Journal of New Materials for Electrochemical Systems, 3 (1999) 241.
12) A.J. More, R.S. Patil, D.S. Dalavi, S.S. Mali, C.K. Hong, M.G. Gang, J.H. Kim, P.S. Patil, Materials Letters, 134 (2014) 298.
2) Y. Wang, E. L. Runnerstrom, D. J. Milliron, Ann. Rev. Chembioeng., 7 (2016).
3) A. M. Österholm, D.E. Shen, J.A. Kerszulis, R.H. Bulloch; M. Kuepfert; A.L. Dyer, J.R. Reynolds, ACS Appl. Mater. Interfaces, 7 (2015) 1413.
4) C. G. Granqvist, Solar Energy Materials and Solar Cells, 92 (2008) 203.
5) C. G. Granqvist, Thin Solid Films, 564 (2014) 1.
6) O. Pyper, A. Kaschner, C. Thomsen, Solar Energy Materials and Solar Cells, 71 (2002) 511.
7) Sh. Cong, Y. Tian, Q. Li, Zh. Zhao and F. Geng, Advanced Materials, 26 (2014) 4260.
8) P. Judeinstein, J. Livage, Materials Science and Engineering B, 3 (1989) 129.
9) O. Bohnke, C. Bohnke, G. Robert, Solid State Ionics,6 (1982) 121.
10) T.J. Knowles, H.N. Hersh and W. W. Kramer, in: 19th Electronic Materials Conf. Aime, Cornell, N.Y. (1977).
11) I. Shiyanovskaya, M. Hepel and E. Tewksburry, Journal of New Materials for Electrochemical Systems, 3 (1999) 241.
12) A.J. More, R.S. Patil, D.S. Dalavi, S.S. Mali, C.K. Hong, M.G. Gang, J.H. Kim, P.S. Patil, Materials Letters, 134 (2014) 298.
)