Authors
Abstract
The purpose of electron linear accelerator project in Institute for Research in Fundamental Sciences (IPM) has been to design and construct a S-band electron linear accelerator in such a way that all its parts be designed and built in Iran as much as possible. For more detailed evaluations and assurance, a cooper accelerating tube with the exact same specification of the main accelerating tube has also been constructed. After designing and constructing prototype tube, it was measured by applying slater perturbation method in resonance mode and steel method in non-resonance mode. Adaption of electric field in different modes for the accelerating tube after tuning with simulation values shows the accuracy of the applied construction and mesurment methods
Keywords
2. L C Maier Jr and J C Slater, Journal of Applied Physics, 23 (1), (1952), 78.
3. L C Maier Jr, J C Slater, Journal of Applied Physics, 23 (1), (1952), 68.
4. L F Chen, C K Ong, C P Neo, and V V Varadan, John Wiley & Sons publisher , Microwave electronics: measurement and materials characterization (2004).
5. A Labanc, TESLA Report DESY, 2008, 01 (2008).
6. R G Carter, IEEE Transactions on, 49(5), (2001) 918.
7. J Shi , A Grudiev, and W Wuensch , Journal NIM-A, 704, (2013) 14.
8. A Grudiev, A Olyunin, J Shi, and W Wuensch, Proceedings of Linear Accelerator Conference, MOP022, (2010).
9. D Alesini et al., journal of JINST, 8(3), (2013) P10010
10. M R Khalvati and S Ramberger, PHYSICAL REVIEW ACCELERATORS AND BEAMS, 19, (2016) 042001
11. F Ghasemi, F Abbasi Davani, M Lamehi Rachti, and H Shaker, S Ahmadiannamin, Journal NIM-A, 772, (2014) 52.
)