Authors
Abstract
In this paper, the feasibility studty of a new method of RF power coupling to acceleration cavity of charged particles accelerator will be evaluated. In this method a slit is created around the accelerator cavity, and RF power amplifier modules is connected directly to the acceleration cavity. In fact, in this design, the cavity in addition to acting as an acceleration cavity, acts as a RF power combiner. The benefits of this method are avoiding the use of RF vacuum tubes, transmission lines, high power combiner and coupler. In this research, cylindrical and coaxial cavities were studied, and a small sample coaxial cavity is build by this method. The results of the resarch showed that compact, economical and safe RF accelerators can be achieved by the proposed method
Keywords
2. J C Whitaker, “power vacuum tubes handbook”, CRC Press LLC, (2000).
3. P Marchand, et al., “operation of the soleil rf system”, Proceedings of SRF2007 conference , Peking Univ., Beijing, China, (2007) 615.
4. K J Russell, IEEE transactions on microwavs theory and tfjchniques, 27, 5 (1979) 472.
5. H Ego, Nucl. Instr. and Meth. in Phys Res, B 56 (2006) 74.
6. E Wooldridge, P Corlett, and J Rogers, Proceedings of 2005 Particle Accelerator Conference, Knoxville, Tennessee, (2005) 1823.
7. M Hergt, R Baumgartner, O Heid, T Hughes, and R Irsigler, “Compact 3,5 kW semiconductor RFmodules based on SiC-VJFETs for accelerator applications”, (2010).
8. J M Bassaler, J M Capdevila, O Gal, F Laine, A Nguyen, J P Nicolai, and K Umiastowski, Nucl. Instr. and Meth. in Phys Res. B 68 (1992) 92.
9. T Wangler, “Principles of RF linear accelerators”, John Wiley & Sons (2002).
10. J Pottier, Nucl. Instr. and Meth. in Phys Res B 40.(1989) 943.
11. CST MICROWAVE STUDIO, Computer Simulation Technology, https://www.cst.com/products/cstmws
)