Author
Abstract
In this article, M2 factor of a thin disk laser with unstable resonator in two regimes is calculated numerically. In the first case, thermal effects are ignored and the parameters of beam width, divergence angle, radius of wave front curvature and finally, M2 factor of laser beam are calculated by using generalized beam parameters. These calculations show that the beam quality of the laser is dependent on the resonator magnification parameter in disk laser. In the second case, thermal effects are considered. In this regime, by using analytical formula for distribution of temperature in crystal and the main contributors to the OPD, M2 factor of thin disk laser is calculated numerically. When the thermal effects are considered, calculations show that the beam quality of thin disk laser is degraded in respect to the condition in which thermal effect was ignored, and also the output power is reduced extremely.
Keywords
2. C Nelson and J Crist, Laser Technik Journal 9, 1 (2012) 36.
3. M Shayganmanesh, M H Daemi, Z h Osgoui, S Radmard, et al., Optics & Laser Technology 44, 7 (2012) 2292.
4. J Alda, “Laser and Gaussian Beam Propagation and Transformation”, Enclopedia of Optical Engineering, Madrid (2001) 999.
5. V Sazegari, M R Jafari Milani and A K.Jafari, Appl Optics 49, 36 (2010) 6910.
6. V Ashooriand et al., “Heat Generation and Removal in Solid State Lasers”, INTECH Open Access Publisher, chapter 12 (2012) 342.
7. G Zhu et al., Appl. Optics 54, 10 (2015) 3025.
8. J Shang et al., Appl. Optics 50, 32 (2011) 6103.
9. J Mende et al., “Thin-disk laser Power scaling to the kW regime in fundamental mode operation’’, SPIE: lasers and applications in Science and Engineering 7193, 71931v, (2009) v1-v12.
10. M Shayganmanesh and R Saeedizadeh, Opt. Quant. Electron 21, 7 (2014) 197.
11. H Weber, “Laser Resonators and Beam Propagation”, 2nd edition, Springer (2004) 57.
12. E Anashkina and O Antipov, J. Opt. Soc. Am. B 27, 3 (2010) 363.
13. G Zhu et al., Appl. Optics 53, 29 (2014) 6756.
)