Authors
Abstract
Design and construction process of special kind of sputter ion pump is described briefly in this paper. In order to investigate the optimization of effective parameters in choosing and designing ILSF ion pumps, this pump has been designed and manufactured. By optimizing some parameters such as dimension and shape of penning cells, anode voltage, magnetic field and internal structure of pump, it is possible to significantly decrease the cost of construction and operation of synchrotron vacuum system. By using the results of simulations and calculations of electromagnetic field, plasma simulation or glow discharge, titanium sputtering, etc., critical parameters in design of internal structure of ion pump have been optimized. In the following configuration, the pumping has been started at 10-4 torr. The pressure goes down to 10-8, without saturation effect in low pressures
Keywords
2. M Audi, and M De Simon, “Ion pumps”, Vacuum 37.8-9 (1987) 629.
3. W Schuurman, “On the theory of electrical characteristics of a penning discharge at low magnetic field”, Physica 43.4 (1969) 513.
4. M D Malev, ”Gas absorption and outgassing of metals”, Vacuum 23.2 (1973) 43.
5. H Hartwig and J S Kouptsidis, “A new approach for computing diode sputter-ion pump characteristics”, Journal of Vacuum Science and Technology 11.6 (1974) 1154.
6. Y Suetsugu and M Nakagawa, “An improved empirical formula for pumping speeds of ion pumps in the high magnetic field mode” , Vacuum 42.12 (1991) 761.
7. Lieberman, A Michael, and J Alan, Lichtenberg. Principles of plasma discharges and materials processing. John Wiley & Sons, (2005).